The current dead angle is easy to form in the negative corner

The following solar LED street light manufacturers summarize the solutions for several solar street lights installation errors. Solution: Before installation, try to stay away from the light source to avoid interference. If it is unavoidable, ensure that there are Customize led street lights Manufacturers no obstructions in the south direction of solar street lights.

 

If you do not pay attention to some important details during the installation process, it will naturally cause the solar street light to not light up normally. The price is naturally much higher than that of cold galvanized. The corners of complex workpieces are prone to 'electric burning' and become grayish, where the zinc layer is thicker.

 

The current dead angle is easy to form in the negative corner, resulting in an undercurrent gray area, where the zinc layer is thinner. In the same way, 'you get what you pay for', solar street lights hot-dip galvanizing are more worth buying. After degreasing and pickling with electrolytic equipment, the workpiece is put into a solution of zinc salt and connected to the negative electrode of the electrolytic equipment.

 

The electroplated layer using the white passivation process is bluish-white or white with green light, and the electroplating layer of the white passivation process is slightly colorful at a certain angle with the sunlight. Compared with cold galvanizing, hot-dip galvanizing has a higher cost and a more complicated manufacturing process than cold galvanizing..